Commit 03a094ee authored by zorglub's avatar zorglub
Browse files

Codecs (except x264). Refs:#438

parent 4d43a6db
......@@ -42,27 +42,27 @@
/* #define DEBUG_DVBSUB 1 */
#define POSX_TEXT N_("X coordinate of the subpicture")
#define POSX_LONGTEXT N_("You can reposition the subpicture by providing another value here." )
#define POSX_TEXT N_("Decoding X coordinate")
#define POSX_LONGTEXT N_("X coordinate of the rendered subtitle")
#define POSY_TEXT N_("Y coordinate of the subpicture")
#define POSY_LONGTEXT N_("You can reposition the subpicture by providing another value here." )
#define POSY_TEXT N_("Decoding Y coordinate")
#define POSY_LONGTEXT N_("Y coordinate of the rendered subtitle")
#define POS_TEXT N_("Subpicture position")
#define POS_LONGTEXT N_( \
"You can enforce the subpicture position on the video " \
"(0=center, 1=left, 2=right, 4=top, 8=bottom, you can " \
"also use combinations of these values (e.g. 6=top-right)).")
"also use combinations of these values, e.g. 6=top-right).")
#define ENC_POSX_TEXT N_("X coordinate of the encoded subpicture")
#define ENC_POSX_LONGTEXT N_("You can reposition the subpicture by providing another value here." )
#define ENC_POSX_TEXT N_("Encoding X coordinate")
#define ENC_POSX_LONGTEXT N_("X coordinate of the encoded subtitle" )
#define ENC_POSY_TEXT N_("Encoding Y coordinate")
#define ENC_POSY_LONGTEXT N_("Y coordinate of the encoded subtitle" )
#define ENC_POSY_TEXT N_("Y coordinate of encoded the subpicture")
#define ENC_POSY_LONGTEXT N_("You can reposition the subpicture by providing another value here." )
#define TIMEOUT_TEXT N_("Timeout of subpictures")
#define TIMEOUT_TEXT N_("Timeout")
#define TIMEOUT_LONGTEXT N_( \
"Subpictures get a default timeout of 15 seconds added to their remaining time." \
"Subpictures get a default timeout of 15 seconds added to their " \
"remaining time." \
"This will ensure that they are at least the specified time visible.")
static int pi_pos_values[] = { 0, 1, 2, 4, 8, 5, 6, 9, 10 };
......
......@@ -44,25 +44,25 @@ static picture_t *DecodeBlock ( decoder_t *, block_t ** );
*****************************************************************************/
#define FILE_TEXT N_("Image file")
#define FILE_LONGTEXT N_( \
"Path of the image file when using the fake input." )
"Path of the image file for fake input." )
#define WIDTH_TEXT N_("Video width")
#define WIDTH_LONGTEXT N_( \
"Allows you to specify the output video width." )
"Output video width." )
#define HEIGHT_TEXT N_("Video height")
#define HEIGHT_LONGTEXT N_( \
"Allows you to specify the output video height." )
"Output video height." )
#define KEEP_AR_TEXT N_("Keep aspect ratio")
#define KEEP_AR_LONGTEXT N_( \
"If selected, width and height will be considered as maximum values." )
"Consider width and height as maximum values." )
#define ASPECT_RATIO_TEXT N_("Background aspect ratio")
#define ASPECT_RATIO_LONGTEXT N_( \
"Aspect ratio of the image file (4:3, 16:9). Default is square pixels." )
#define DEINTERLACE_TEXT N_("Deinterlace video")
#define DEINTERLACE_LONGTEXT N_( \
"Allows you to deinterlace the image after loading." )
"Deinterlace the image after loading it." )
#define DEINTERLACE_MODULE_TEXT N_("Deinterlace module")
#define DEINTERLACE_MODULE_LONGTEXT N_( \
"Specifies the deinterlace module to use." )
"Deinterlace module to use." )
static char *ppsz_deinterlace_type[] =
{
......
......@@ -104,7 +104,9 @@ void E_(ClosePostproc)( decoder_t *, void * );
"8 ump4 \n" \
"16 no padding\n" \
"32 ac vlc\n" \
"64 Qpel chroma.")
"64 Qpel chroma.\n" \
"This must be the sum of the values. For example, to fix \"ac vlc\" and " \
"\"ump4\", enter 40.")
#define HURRYUP_TEXT N_("Hurry up")
#define HURRYUP_LONGTEXT N_( \
......@@ -121,20 +123,24 @@ void E_(ClosePostproc)( decoder_t *, void * );
#define DEBUG_TEXT N_( "Debug mask" )
#define DEBUG_LONGTEXT N_( "Set ffmpeg debug mask" )
/* TODO: Use a predefined list, with 0,1,2,4,7 */
#define VISMV_TEXT N_( "Visualize motion vectors" )
#define VISMV_LONGTEXT N_( "Set motion vectors visualization mask.\n" \
#define VISMV_LONGTEXT N_( \
"You can overlay the motion vectors (arrows showing how the images move) "\
"on the image. This value is a mask, based on these values:\n"\
"1 - visualize forward predicted MVs of P frames\n" \
"2 - visualize forward predicted MVs of B frames\n" \
"4 - visualize backward predicted MVs of B frames" )
"4 - visualize backward predicted MVs of B frames\n" \
"To visualize all vectors, the value should be 7." )
#define LOWRES_TEXT N_( "Low resolution decoding" )
#define LOWRES_LONGTEXT N_( "Will only decode a low resolution version of " \
"the video." )
#define LOWRES_LONGTEXT N_( "Only decode a low resolution version of " \
"the video. This requires less processing power" )
#define SKIPLOOPF_TEXT N_( "Skip the loop filter for H.264 decoding" )
#define SKIPLOOPF_LONGTEXT N_( "Skipping the loop filter (aka deblocking) " \
"usually has a detrimental effect on quality. However for HDTV streams " \
"this provides a big speedup." )
"usually has a detrimental effect on quality. However it provides a big " \
"speedup for high definition streams." )
#define LIBAVCODEC_PP_TEXT N_("FFmpeg post processing filter chains")
/* FIXME (cut/past from ffmpeg */
......@@ -189,28 +195,29 @@ void E_(ClosePostproc)( decoder_t *, void * );
#define ENC_VT_TEXT N_( "Video bitrate tolerance" )
#define ENC_VT_LONGTEXT N_( "Video bitrate tolerance in kbit/s." )
#define ENC_INTERLACE_TEXT N_( "Enable interlaced encoding" )
#define ENC_INTERLACE_TEXT N_( "Interlaced encoding" )
#define ENC_INTERLACE_LONGTEXT N_( "Enable dedicated " \
"algorithms for interlaced frames." )
#define ENC_INTERLACE_ME_TEXT N_( "Enable interlaced motion estimation" )
#define ENC_INTERLACE_ME_TEXT N_( "Interlaced motion estimation" )
#define ENC_INTERLACE_ME_LONGTEXT N_( "Enable interlaced " \
"motion estimation algorithms. It requires more CPU." )
"motion estimation algorithms. This requires more CPU." )
#define ENC_PRE_ME_TEXT N_( "Enable pre-motion estimation" )
#define ENC_PRE_ME_TEXT N_( "Pre-motion estimation" )
#define ENC_PRE_ME_LONGTEXT N_( "Enable the pre-motion " \
"estimation algorithm.")
#define ENC_RC_STRICT_TEXT N_( "Enable strict rate control" )
#define ENC_RC_STRICT_TEXT N_( "Strict rate control" )
#define ENC_RC_STRICT_LONGTEXT N_( "Enable the strict rate " \
"control algorithm." )
#define ENC_RC_BUF_TEXT N_( "Rate control buffer size" )
#define ENC_RC_BUF_LONGTEXT N_( "Rate control " \
"buffer size (in kbytes)." )
"buffer size (in kbytes). A bigger buffer will allow for better rate " \
"control, but will cause a delay in the stream." )
#define ENC_RC_BUF_AGGR_TEXT N_( "Rate control buffer aggressiveness" )
#define ENC_RC_BUF_AGGR_LONGTEXT N_( "Allows you to specify the rate control "\
#define ENC_RC_BUF_AGGR_LONGTEXT N_( "Rate control "\
"buffer aggressiveness." )
#define ENC_IQUANT_FACTOR_TEXT N_( "I quantization factor" )
......@@ -223,11 +230,11 @@ void E_(ClosePostproc)( decoder_t *, void * );
"reduction algorithm to lower the encoding length and bitrate, at the " \
"expense of lower quality frames." )
#define ENC_MPEG4_MATRIX_TEXT N_( "Enable MPEG4 quantization matrix" )
#define ENC_MPEG4_MATRIX_LONGTEXT N_( "Allows you to use the MPEG4 " \
"quantization matrix for mpeg2 encoding. This generally yields a " \
#define ENC_MPEG4_MATRIX_TEXT N_( "MPEG4 quantization matrix" )
#define ENC_MPEG4_MATRIX_LONGTEXT N_( "Use the MPEG4 " \
"quantization matrix for MPEG2 encoding. This generally yields a " \
"better looking picture, while still retaining the compatibility with " \
"standard MPEG-2 decoders.")
"standard MPEG2 decoders.")
#define ENC_HQ_TEXT N_( "Quality level" )
#define ENC_HQ_LONGTEXT N_( "Quality level " \
......@@ -242,18 +249,18 @@ void E_(ClosePostproc)( decoder_t *, void * );
"threshold to ease the encoder's task." )
#define ENC_QMIN_TEXT N_( "Minimum video quantizer scale" )
#define ENC_QMIN_LONGTEXT N_( "Allows you to specify the minimum video " \
#define ENC_QMIN_LONGTEXT N_( "Minimum video " \
"quantizer scale." )
#define ENC_QMAX_TEXT N_( "Maximum video quantizer scale" )
#define ENC_QMAX_LONGTEXT N_( "Allows you to specify the maximum video " \
#define ENC_QMAX_LONGTEXT N_( "Maximum video " \
"quantizer scale." )
#define ENC_TRELLIS_TEXT N_( "Enable trellis quantization" )
#define ENC_TRELLIS_TEXT N_( "Trellis quantization" )
#define ENC_TRELLIS_LONGTEXT N_( "Enable trellis " \
"quantization (rate distortion for block coefficients)." )
#define ENC_QSCALE_TEXT N_( "Use fixed video quantizer scale" )
#define ENC_QSCALE_TEXT N_( "Fixed quantizer scale" )
#define ENC_QSCALE_LONGTEXT N_( "A fixed video " \
"quantizer scale for VBR encoding (accepted values: 0.01 to 255.0)." )
......
......@@ -112,7 +112,7 @@ static char *ppsz_justification_text[] = {N_("Center"),N_("Left"),N_("Right")};
"UTF-8 encoding within subtitles files.")
#define FORMAT_TEXT N_("Formatted Subtitles")
#define FORMAT_LONGTEXT N_("Some subtitle formats allow for text formatting. " \
"VLC partly implements this, but you can choose to disable all formatting.")
"VLC partly implements this, but you can choose to disable all formatting.")
vlc_module_begin();
......
......@@ -40,7 +40,7 @@ static int PacketizerOpen( vlc_object_t * );
static void DecoderClose ( vlc_object_t * );
#define DEBUG_TEXT \
"If nonzero, this gives additional debug information." \
"Enable debug"
#define DEBUG_LONGTEXT \
"This integer when viewed in binary is a debugging mask\n" \
......
......@@ -89,7 +89,7 @@ static block_t *Encode( encoder_t *p_enc, picture_t *p_pict );
*****************************************************************************/
#define ENC_QUALITY_TEXT N_("Encoding quality")
#define ENC_QUALITY_LONGTEXT N_( \
"Allows you to specify a quality between 1 (low) and 10 (high), instead " \
"Enfore a quality between 1 (low) and 10 (high), instead " \
"of specifying a particular bitrate. This will produce a VBR stream." )
vlc_module_begin();
......
......@@ -49,14 +49,14 @@ static block_t *Encode ( encoder_t *, aout_buffer_t * );
#define ENC_QUALITY_TEXT N_("Encoding quality")
#define ENC_QUALITY_LONGTEXT N_( \
"Allows you to specify a quality between 0.0 (high) and 50.0 (low), " \
"Force a specific encoding quality between 0.0 (high) and 50.0 (low), " \
"instead of specifying a particular bitrate. " \
"This will produce a VBR stream." )
#define ENC_MODE_TEXT N_("Stereo mode")
#define ENC_MODE_LONGTEXT N_( "Select how stereo streams will be handled" )
#define ENC_MODE_LONGTEXT N_( "Handling mode for stereo streams" )
#define ENC_VBR_TEXT N_("VBR mode")
#define ENC_VBR_LONGTEXT N_( \
"By default the encoding is CBR." )
"Use Variable BitRate. Default is to use Constant BitRate (CBR)." )
#define ENC_PSY_TEXT N_("Psycho-acoustic model")
#define ENC_PSY_LONGTEXT N_( \
"Integer from -1 (no model) to 4." )
......
......@@ -154,19 +154,17 @@ static block_t *Encode ( encoder_t *, aout_buffer_t * );
*****************************************************************************/
#define ENC_QUALITY_TEXT N_("Encoding quality")
#define ENC_QUALITY_LONGTEXT N_( \
"Allows you to specify a quality between 1 (low) and 10 (high), instead " \
"Enforce a quality between 1 (low) and 10 (high), instead " \
"of specifying a particular bitrate. This will produce a VBR stream." )
#define ENC_MAXBR_TEXT N_("Maximum encoding bitrate")
#define ENC_MAXBR_LONGTEXT N_( \
"Allows you to specify a maximum bitrate in kbps. " \
"Useful for streaming applications." )
"Maximum bitrate in kbps. This is useful for streaming applications." )
#define ENC_MINBR_TEXT N_("Minimum encoding bitrate")
#define ENC_MINBR_LONGTEXT N_( \
"Allows you to specify a minimum bitrate in kbps. " \
"Useful for encoding for a fixed-size channel." )
"Minimum bitrate in kbps. This is useful for encoding for a fixed-size channel." )
#define ENC_CBR_TEXT N_("CBR encoding")
#define ENC_CBR_LONGTEXT N_( \
"Allows you to force a constant bitrate encoding (CBR)." )
"Force a constant bitrate encoding (CBR)." )
vlc_module_begin();
set_shortname( "Vorbis" );
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment